Health and safety, & Tips:
- Well ventilated area
- Check pressures before use
- Cover model with wrap
- Must have parents permission when airbrushing anyone under 16
- Do NOT airbrush over any open wounds
- Always take spare needle and nossle cap on shoots, they both ware out and the needle could break or split
- Treat the airbrush with care as they are delicate
- For older people, be very careful with the amount placed around the eyes, as it could have a reverse effect
- The last colour used is always the one that stays in the needle
- Take expensive shoes, clothing and jewelry of as it could spray everywhere
- Makeup face to face, not infront of a mirror
- Pressure should not be above 12
- Talk your way through the makeup
- Do not let the model breathe in the spray
- Be aware of beards and eyebrows
- No cross contamination
- All products whatever base must not be thicker than semi skimmed milk
- Water based/Alcohol based/Silicone based
- Alcohol based-great for continuity because it stays on skin, however caution has to be caused on the face
- Use silicone to cover up bruises and tattoos
- For fashion and HD TV- Airbrushing always works well
- Brand-Temptue
- Silicone drys quickly and is based with plastic inside. It has a ball bearing inside so it breaks the lumps up, however it has to be shaken well before use.
- Place a tiny bit of thinner first to see if airbrush is working
- Mix colours together as you would a normal base
- Test the colour on the side of the face as you would a traditional base
- To mix the bases, cover end with tissue, unscrew the nossle cap, and gently pull back the lever until the colours start to bubble.
- Always stretch the neck up when airbrushing
- 99% of problems in airbrushing is because they are not cleaned properly
- Clean airbrush straight away, as both silicone and alcohol products have properties inside that dry and this ruins the needle.
- Empty the colour cups excess paint
- Add cleaning soltuion
- Wipe the cup with tissue paper or cotton buds
- Add more solution to the cup
- Spray cleaner into a tissue through the airbrush until it sprays clear
- Clean excess with tissue
No comments:
Post a Comment